- 【Charging Fast】: The charging current can be selected between 500 mA / 1000 mA / 1500 mA / 2000 mA. Intelligent auto identification of different batteries, each battery is controlled & monitored independently, and three modes of charging, discharging, and testing can be selected and used at the same time.
- 【Apply to】: 32650, 26650, 26500, 25500, 22650, 22500, 21700, 20700, 18700, 18650, 18500, 18490, 18350, 17670, 17650, 17500, 17350, 16650, 16340(123A), 16500, 14650, 14500, 14430, 14350, 13650, 13500, 13450, 12650, 12500, 12340, 10500, 10440, 10350, 10340 1.2V Ni-MH/Ni-CD, 3.6V/ 3.7V Li-ion/IMR/INR/ICR, AAAA/AAA/AA/A/C/SC/D.
- 【Function】: 4 slot discharge function, Charging any size rechargeable batteries simultaneously, Overheat and overcharge protection, Automatically stops charging when complete.4 operating modes include Charge, Discharge, Refresh and Test mode ensures optimal performance and maximum battery life.
- 【Power bank function】: By attaching two or more 18650 battery, out put of 5 V / 2A can be achieved. When one 18650 battery is installed, USB output becomes 5 V / 1A. (The power bank function is valid only when the power is disconnected and the battery is installed.It is not applicable to the NiMH rechargeable battery.Please use the high capacity battery.)
- 【High efficiency】: Large LCD display states the voltage, current, charging time, mode, battery type, internal resistance,battery capacity data.
Memory effect, also known as battery effect, lazy battery effect, or battery memory, is an effect observed in nickel-cadmium and nickel–metal hydride rechargeable batteries that causes them to hold less charge. It describes the situation in which nickel-cadmium batteries gradually lose their maximum energy capacity if they are repeatedly recharged after being only partially discharged. The battery appears to “remember” the smaller capacity.
This battery charger can largely eliminate the memory effect:
-A complete discharge before each charge is not necessary.
-Occasional unloading, eg after 50 partial discharge cycles, is recommended.
-The battery life can be significantly increased by partial discharges -this applies to both NiMH and lithium batteries.
Compatible:
3.6V/3.7V Li-ion/IMR/INR/ICR
32650,26650,26500,25500,22650,22500,21700, 20700, 18700,18650,18500,18490,18350,
17670,17650,17500,17350,16650, 16340(RCR123),16500,14650,14500,14430,14350,13650,
13500,13450, 12650,12500,12340,10500,10440,10350,10340
1.2V Ni-MH/Ni-CD
AAAA/AAA/AA/A/C/SC/D
Function:
1.4 slot discharge function, the discharging current is 500mA.
2.This product is MCU controlled. It can charge any capacity of Ni-MH/CD and Li-ion batteries.
3.Four charging current: 500mA/1000mA*4; 1500mA*3; 2000mA*2.
4.Black light LCD display can show the charging condition, battery type, charging time, voltage, current, capacity and internal resistance at one time.
5.Every slot is independently controlled.
6.Power bank function.
7.It can test battery type, Li-ion or NI-MH battery, and detect working time. 8.Battery voltage detection, battery voltage can be showed on LCD display.
8.With over-charge, over-discharge, short-circuit protection, Temperature protection, bad battery detection and reverse charging protection.
Package include:
1xBattery Charger(Battery not Included)
1xAdapter
1 xUser Manual